Mounting & Hardware

Surface Mounts

(Type A) Threaded rods screw into back of plaque or boss and are inserted into cement-filled holes.

(Type B) Machine screws through optional rosettes into cement-filled holes. Lead shields available for masonry.

(Type C) Installation using toggle bolts with optional rosettes for hollow or drywall mount.

(Type D) Installation into wood surfaces using wood screws and optional rosettes.

Rosettes (Optional):

Rosettes are decorative covers for bronze and aluminum plaques used to cover the screw heads in
each corner (included in price). Rosettes are available in 1/2″, 3/4″, 1″ and 1-1/2″ diameters. Rosettes
with highlights are oxidized, aluminum rosettes are painted to match plaque background. Screw heads
are painted to match plaque background. Click here for your choice in colors.


R-1	R-2	R-3	R-4	R-5	R-6	R-7
1/2″, 3/4″ 1″ & 1-1/2″	1/2″, 3/4″ 1″ & 1-1/2″	1/2″, 3/4″ 1″ & 1-1/2″	1″ & 1-1/2″	1/2″, 3/4″ 1″ & 1-1/2″	1/2″, 3/4″ 1″ & 1-1/2″	1″ & 1-1/2″

Stake & Post Mount Options

(Type E) Garden Stake Mount:

Machine screws going through 5/16″ thick black anodized stakes into back of plaque. Maximum plaque size is 12″ x 8″ for 1 stake or 20″ x 8″ for 2 stakes.

(Type F) Post Mount:

Black painted aluminum brackets attach to back of plaque with machine screws. Aluminum square post bolts into bracket at a 45º or 90º angle. Plaques over 24″ wide require 2 posts.

Post Cap Mount:

Cast as part of an aluminum or bronze plaque, the post cap mount is designed to fit on 1-1/2”, 2” or 3” ID posts. Available on almost any custom plaque, single or double-sided, up to 30” x 30”. Posts and post caps sold individually. Call for quote.

Keyhole Mount:

Machined key seat mounts as an integral part of the back of a plaque. Call for quote.